CPU |
- Support for an Intel® Core™ i7 series processor in the LGA1366 package
(Go to GIGABYTE's website for the latest CPU support list.)
- L3 cache varies with CPU
|
QPI |
- 4.8GT/s, 6.4GT/s
|
Chipset |
- North Bridge: Intel® X58 Express Chipset
- South Bridge: Intel® ICH10R
|
Memory |
- 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory(Note 1)
- Dual/3 channel memory architecture
- Support for DDR3 2200+/1333/1066/800 MHz memory modules
- Support for non-ECC memory modules
- Support for Extreme Memory Profile (XMP) memory modules
(Go to GIGABYTE's website for the latest memory support list.) |
Audio |
- Realtek ALC889 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for Dolby® Home Theater
- Support for S/PDIF In/Out
- Support for CD In
|
LAN |
- 2 x Realtek RTL8111E chip (10/100/1000 Mbit)
- Support for Teaming
- Support Smart Dual LAN
|
Expansion Slots |
- 4 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2/PCIEX16_3/PCIEX16_4) (Note 2)
- 3 x PCI Express x16 slots, running at x8
(PCIEX8_1/PCIEX8_2/PCIEX8_3) (Note 3) (All PCI Express slots conform to
the PCI Express 2.0)
|
Multi-Graphics Technology |
- Support for 2-Way/3-Way/4-Way ATI CrossFireX™/NVIDIA SLI technology
|
Storage Interface | South Bridge:
- 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
Marvell 9128 chip:
- 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
- Support for SATA RAID 0, and RAID 1
* SATA3 RAID 0 4x and SATA3 2x performance are maximum theoretical values. Actual performance may vary by system configuration.
* SATA3 SSDs are not recommended for use in RAID 0 mode on Marvell SE9128 ports.
GIGABYTE SATA2 chip:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 2 x SATA 3Gb/s connectors (GSATA2_8, GSATA2_9) supporting up to 2 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, and JBOD
JMicron JMB362 chip:
- 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel sup- porting up to 2 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, and JBOD
iTE IT8720 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
|
USB | Integrated in the South Bridge:
- Up to 12 USB 2.0/1.1 ports (6 on the back panel, including 2
eSATA/USB Combo, 4 via the USB brackets connected to the internal USB
headers)
NEC chip:
- Up to 2 USB 3.0/2.0 ports on the back panel
* USB 3.0 10x performance is a maximum theoretical value. Actual performance may vary by system configuration.
|
IEEE 1394 |
- T.I. TSB43AB23 chip
- Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
|
Internal I/O Connectors |
- 1 x 24-pin ATX main power connector
- 2 x 8-pin ATX 12V power connector
- 2 x 4-pin PCIe 12V power connectors
- 1 x floppy disk drive connector
- 1 x IDE connector
- 8 x SATA 3Gb/s connectors
- 2 x SATA 6Gb/s connectors
- 1 x CPU fan header
- 3 x system fan headers
- 1 x power fan header
- 1 x North Bridge fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In header
- 1 x S/PDIF Out header
- 3 x USB 2.0/1.1 headers
- 1 x IEEE 1394a header
- 1 x power button
- 1 x reset button
|
Back Panel Connectors |
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x coaxial S/PDIF Out connector
- 1 x optical S/PDIF Out connector
- 1 x clearing CMOS button
- 2 x IEEE 1394a ports
- 4 x USB 2.0/1.1 ports
- 2 x USB 3.0 ports
- 2 x eSATA/USB Combo connectors
- 2 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)
|
I/O Controller |
- iTE IT8720 chip
|
H/W Monitoring |
- System voltage detection
- CPU/North Bridge temperature detection
- CPU/System/Power fan speed detection
- CPU overheating warning
- CPU fan fail warning
- CPU/System fan speed control (Note 4)
|
BIOS |
- 2 x 16 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS™
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
|
Unique Features |
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress BIOS Rescue
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune (Note 5)
- Support for Dynamic Energy Saver™ 2
- Support for Smart 6™
- Support for Auto Green
- Support for eXtreme Hard Drive (X.H.D)
- Support for ON/OFF Charge
- Support for Q-Share
|
Bundle Software |
- Norton Internet Security (OEM version)
|
Operating System |
- Support for Microsoft® Windows® 7/Vista/XP
|
Form Factor |
- XL-ATX Form Factor; 34.5cm x 26.2cm
Please refer to "Chassis Support List" for compatible PC cases.
|
Note | (Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is
installed, the actual memory size displayed will be less than 4 GB.
(Note 2) For optimum performance, if only one PCI Express graphics card is to be installed, be sure to
install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is
recommended that you install them in the PCIEX16_1 and PCIEX16_3 slots.
(Note 3) Each PCIEX8 slot shares bandwidth with the corresponding PCIEX16 slot (PCIEX8_1 with
PCIEX16_1, PCIEX8_2 with PCIEX16_2, and PCIEX8_3 with PCIEX16_3). When a PCIEX8 slot is
populated, its corresponding PCIEX16 slot will operate at up to x8 mode.
(Note 4) Whether the CPU fan speed control function is supported will depend on the CPU cooler you install.
(Note 5) Available functions in EasyTune may differ by motherboard model. |
No comments:
Post a Comment